E-Series booster pump gas-driven hydraulic pumps E-Series booster pump gas-driven hydraulic pump, in 2 / 3 of static pressure, with the peak hydraulic output could reach 135 horsepower (1 kw). Which we used to operate large-scale implementation, or as 1,2 5 gallons (3.8,7.6 or 18.9 L) of memory.
H Series pressurized pump¡¡Use of the P-economic range of air caps, as well as the E-series and the hydraulic cylinder body, which will meet the requirements of long life, and without the flow.
P Series pressurization device¡¡2 / 3 static pressure, with the peak hydraulic output can be achieved 0.90 horsepower (0.68 kw). Scfm air consumption of 12, is a portable operation, with a 160 Cu (2.6L) memory, or is installed in our 3.8,7.6 or 18.9 L of memory, used to operate small and medium-sized actuators
Product Applications
Portable high-voltage power station, wellhead equipment and oil-pressure test equipment, hose test equipment, high-voltage gas-pressure test,
Taiwan-valve testing, chemical reagent injection system, portable pressurized system and pressure testing system, bolt tension power system, oil / gas well emergency shut down system, leak test system, and liquefied gas endorsement systems, fire protection systems, Expanding power unit of the oilfield and marine diesel engine starter, hose testing devices, valve testing devices, cylinders and containers testing devices, gas compression and transmission device
Advantages
Equipment integration can be put into operation at any time
Low operating costs, the need to maintain the current position of energy consumption
Low maintenance costs
No fever, can be used to blast occasions
Features
Double itinerary, smooth output
High / low ratio of more than pump
Hydraulic integrated circuit (chassis and valve base)
Integrated structure, light weight, portable
Polymerization dynamic seal and bearing standards
Gas-driven booster pump, when welding can be controlled by solenoid valve were two motor vehicle chassis clamping cylinders, clamping force can be built-in air Pressure Regulating Valve control, the device equipped with an 8-liter tank. According to the size of the fuel tank, the options available.
Multi-loop clamping device
The pump will be four solenoid valve and the body fully integrated into one, each solenoid valve control loop of a fixture, the solenoid valve are zero leakage, operating pressure of 200 Bar around through Manifold, Oil Surge suction, this equipment and used in the automobile plant.
Plant maintenance equipment
The device based on user requirements and the design and production equipment installed in the small car, as dynamic energy robot, a remote control from the control room, so that nuclear power plants can be dangerous to enter the region, maintenance, operation, the use of redundant equipment Balance and backup design, pressure up to 200 Bar
Eight-way solenoid valve cascade booster pump
Automobile plant Transmission Case, of the devices, eight-way solenoid valve installed in the integrated circuit, control, respectively.
